Check out the Vapefly KRIEMHILD 200W Starter Kit, featuring a 5-200W output range, temperature control options, and is paired with the KRIEMHILD Tank. Powered by the 3S Chipset, the KRIEMHILD Starter Kit is fueled by a pair of high amp batteries (not included), accepting 18650, 20700, and 21700 options. Delivering up to 200W of output, the Vapefly KRIEMHILD Kit can be used with the included KRIEMHILD Tank or utilize rebuildable options to make full use of the temperature control suite.

Vapefly KRIEMHILD 200W Box Mod Features:
Dimensions - 91mm by 47.5mm by 38.6mm
Dual High-Amp 18650 Batteries - Not Included
Optional 2X700 Batteries - Battery Sleeve Incl.
Wattage Output Range: 5-200W
Voltage Output Range: 0-9V
Resistance Range: 0.02-3.0ohm
Temperature Range: 200-600℉ / 100-315℃
Zinc-Alloy Chassis Construction
Intuitive Firing Button
1.33" TFT Color Screen
Two Adjustment Buttons
Bottom Slide Out Battery Tray
Overcharge Protection
Short-Circuit Protection
Low Power Indication
Overheat Protection
Battery Reverse Protection
10S Overtime Protection
Type-C Port
Available in Black Gold, Black, Gunmetal, Silver

Vapefly KRIEMHILD Sub-Ohm Tank Features:
26mm Diameter
5mL Glass Capacity
Pyrex Glass Reinforcement
Sliding Top Fill System
Superior Stainless Steel Tank Construction
Vapefly KRIEMHILD Coil Series
0.2ohm Single Mesh Coil - rated for 50-80W
0.15ohm Triple Mesh Coil - rated for 50-80W
Press-Fit Coil Installation
Self-Closing E-Liquid Holes
Dual Slotted Bottom Airflow Control Ring
Threaded 510 Connection
810 Widebore Drip Tip
Available in SS, Black, Gunmetal, Black Gold

Includes:
1 KRIEMHILD Mod
1 KRIEMHILD Tank
1 0.2ohm Single Mesh Coil
1 0.15ohm Triple Mesh Coil
1 Replacement Glass
1 Set of O-Rings
2 Fill Port Silicone
2 Pole Silicone
2 User Manual
1 Type-C Cable

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.