Check out the new Vandy Vape PULSE V2 95W Squonk Box Mod, featuring a single high amp battery utilization, leakproof squonking system, and waterproof PCBA. Created in collaboration with Tony B, the PULSE V2 Box Mod delivers a 95W ceiling from a single 20700 or 21700 battery, with options to use a 18650 battery with the included adapter. Constructed from durable nylon, the PULSE V2 Squonk Mod is ultra lightweight and has waterproofing of the PCBA, inspired by the Vandy Vape SWELL Box Mod. This allows the mod to be cleaned easily and without worry of jeopardizing the control board. Equipped with a leakproof squonking system, the squeeze bottle fits directly underneath the 510 connection, and can be filled by unthreading the cap at the base of the device. Featuring a advanced temperature control system, this is a great mod for anyone looking to get into squonking or loves a refined and tailored vaping system.

Vandy Vape PULSE V2 95W Squonk Box Mod Features:
Collaboration with Tony B
Proprietary Chipset
Dimensions - 82.3mm by 54.7mm by 28.4mm
Single High-Amp 20700 / 21700 Battery - Not Included
Optional 18650 Battery - Battery Adapter Included
Wattage Output Range: 5-95W
Voltage Output Range: 0.5-6.0V
Resistance Range: 0.05-3.0ohm
Power Mode
Bypass Mode
TC Mode
Nickel, Titanium, and Stainless Steel Wire Compatibility
Zinc-Alloy Chassis Construction
Waterproof PCBA
Intuitive Firing Button
Two Adjustment
Colored Display Screen
Magnetic Battery Panel
Threaded Squonk Bottle Fill System
Short-Circuit Protection
Over Heating Protection
Low Battery Protection
Open Circuit Protection
10S Cut Off Protection
Overcurrent Protection
510 BF Squonk Pin
Type-C Port
Available in Rainbow Resin, G10 Obsidian Black, Flame Red Resin, Sky Blue Resin

Includes:
1 Pulse II 2 Box Mod
2 Instructional Manual
1 Warranty Card
1 QC Type C Cable 
1 Proper User Guidance
1 18650 Battery Adapter
2 Silicone Squeeze Bottle

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.