Check out the Uwell Crown M Pod Mod Kit, offering a 5-35W output, dual resistance coil option, and can hold up to 4mL within the refillable pod. Constructed from lightweight PCTG materials, the chassis of the Uwell Crown M Pod Mod offers a visually striking design, while offering protection against light falls and drops. Equipped with a 1000mAh battey, the Crown M Pod Mod cann deliver up to 35W. Holding up to 4mL of eJuice or nicotine salts, the Crown M can utilize a new dual resistance coil, offering MTL and RDL vaping simply by changing the output power. The intelligent proprietary chipset within can automatically detect the resistance of an installed coil to set the appropriate wattage.

 Uwell Crown M 35W Pod Mod Kit Features:
• Dimensions: 82.3mm by 52.6mm by 26.8mm
• Battery Capacity: 1000mAh
• Wattage Range: 5-35W
• Voltage Range: N/A
• Resistance Range: 0.3-3.0ohm
• Chassis Material: PC Material
• Charging: Type-C Port
• Operation: Intuitive Firing Button
• Adjustment: Rotating Dial
• Display: 0.42" OLED Screen
• Airflow: Slider
• Pod Series: Crown M Pods
• Fill System: Top Filled - Silicone Stoppered
• Pod Material: PCTG
• Pod Capacity: 4mL
• Pod Connection: Snap-In
• Coil Installation: Press Fit
• Coil Support: Crown M Coils

Includes:
• 1 Crown M Device
• 1 Crown M Pod
• 1 0.4/0.8ohm Crown M Twin Coil
• 1 0.6ohm Crown M Coil
• 1 User Manual
• 1 Type-C Cable
 
Available Options:
Black, Blue, Brown, Orange

WARNINGS:
Make sure to properly prime each coils and pods before use.

If the coils has a sub-ohm resistance, please make sure you have a great understanding and technical knowledge on how to use mods and batteries that can handle Sub-Ohm coils. Do not use short or flat 510 connection on any hybrid or hybrid style device. If you are not familiar or unsure of particular products or set-ups, please do not use it. Always use proper precautions and handling.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.