The TigerTek Nada 25mm RDA is made in collaboration with VapnFagan, featuring a large spacious build deck, massive 10mm deep juice wells, and a precision airflow that can be regulated with the included air plugs. Measuring in at 25mm, the Nada RDA's 24mm build deck is expansive with a unique four posts and massive 2.5mm terminals. Coil leads are side secured via hex screws to fasten down most large gauge coils or complex configuration. The massive internal juice wells are 10mm deep and can retain a good amount of e Liquid to prevent any unwanted dry hits. The Nada RDA has a unique airflow design with dual massive airflows at the bottom that feed directly beneath the coils using a threaded opening. In addition, the top cap also has an diagonal airflow that leads to the coils for even more airflow for optimal vapor production. Furthermore, the air outlets can be stoppered with various airplug screws of differing sizes that fit within the threaded openings to allow for finer minute adjustments.

TigerTek x VapnFagan NADA 25mm RDA Features:

• 25mm Diameter 
• 10mm Deep Juice Well 
• Superior Stainless Steel Construction 
• Spacious Build Deck
• Unique Four Post Design
• Side Secured via Large Hex Screws
• Single or Dual Coil Configuration 
• Massive Airflow Control System 
• Airplug Screws for Precise Adjustment Control
• Dual Slotted Side Airflows - Feeds Underneath Coil
• Adjustable Top Side Airflow in Top Cap
• Extended Squonk BF 510 Pin 
• Gold-Plated 510 Connection 
• Available in Full Stainless Steel, Full Black, Full Silver, Black, Stainless Steel

Includes:

• 1 Tigertek NADA RDA
• 1 810 Delrin Widebore Drip Tip 
• 1 810 PCTG Widebore Drip Tip
• 1 510 Drip Tip Adapter
• 1 Squonk BF 510 Pin
• 3 Air Plug Screws (2.5mm/1.5mm/Solid)
• 1 Accessory bag

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.