Discover the Steam Crave Mini Robot MTL Combo Kit, featuring a voltage based tube mod, SC Chipset, and is paired with the Steam Crave Mini ROBOT RTA. Utilizing a single high-amp 18650 battery, the Mini ROBOT Combo Kit can deliver adjustable voltage output, spanning between 3.5-4.2V. With three power levels, the MINI ROBOT Combo Kit pairs perfectly with the Steam Crave Mini ROBOT RTA, building a single MTL coil on the dual post build deck. With adjustable airflow pins, the Steam Crave Mini ROBOT Combo Kit comes with other sized pins to allow the user to carefully adjust the perfect rate of airflow hitting the coil. Holding up to 3mL of eJuice within the tank capacity, the Mini ROBOT RTA is refilled from the top, behind a threaded cap and is perfect for those that love restricted draws that focus on flavor production.

Steam Crave MTL VV Steam Stick Features:
SC Chipset
Dimensions - 127.35mm by 23mm Diameter
Single High-Amp 18650 Battery - Not Included
Voltage Output Range: 3.5-4.2V
3 Voltage Levels: 3.5/3.8/4.2V
Resistance Range: 0.35-3.0ohm
Stainless Steel Chassis Construction
Intuitive Firing Button
Over Temperature Protection
Battery Reverse Protection
Low Resistance Protection
Over-Current Protection
Short-Circuit Protection
Low Battery Protection
10S Overtime Protection
Threaded 510 Connection
Available in Black or SS

Steam Crave Mini Robot MTL RTA Features:
23mm Diameter
3mL Tank Capacity
2mL Replacement Glass
Threaded Top Fill Cap
Adjustable Airflow Screws
Dual Post Build Deck
Top Secured via Phillips Screws
Single Coil Configuration
PEEK Insulator
Threaded 510 Connection
Available in Black or SS

Includes:
1 Mini Robot Tube
1 Bag of Spare Silicone and Screws
1 MIni Robot RTA
2 0.8ohm Airflow Pins
2 1.6ohm Airflow Pins
1 Blind Air Pin
1 3mL Bubble Glass
1 2mL Glass
1 Spare 510 Drip Tip
2 0.45ohm SS316L Coils
1 Spare Bag of O-Rings
1 Allen Key
1 Steamcrave Sticker
1 Manual

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.