The Smoant Battlestar Squonker 200W Starter Kit is an innovative vape kit, featuring an integrated 7.0mL silicone squonk bottle, a slew of safety protections, and is paired with a squonk RDA to allow the best synergy between box mod and atomizer. Constructed from durable zinc-alloy, the Smoant Battlestar Squonker can withstand light drops and falls, protecting the proprietary chipset within. Also housed within the chassis is an 7.0mL silicone squonk bottle that slides into the box mod to be attached by a short measure of flexible tubing within, eliminating the need for an external bottle of juice to allow those that like to drip the ability to, without needing a bottle or removing the top cap or drip tip to do so. In addition, affixed to the exterior is an intuitive firing button and a pair of adjustment buttons. Prominently sitting at the top of the box mod is an ornate gold-plated squonking button to pump the internal resevoir of juice while possessing an anti-oversquonking feature to provide just the right amount of eJuice to saturate the cotton. Powered by a pair of high-amp 18650 batteries (sold separately) accessible via the bottom hinged battery door, the Battlestar Squonker has a range of 1 to 200 watts and can reach resistances as low as 0.05ohms while relaying the information on the 0.96" OLED Display Screen. The Smoant Battlestar Squonker Box Mod is paired with the Battlestar Squonker RDA, a 24mm dual coil rebuildable atomizer that features a dual coil configuration anchored to four open terminals arranged on two posts, both top secured via flathead screws. A dual slotted top cap is held in place by a pair of silicone o-rings, venting the airflow from the side directly to the internal coil configurations. 

Smoant Battlestar Squonker Box Mod Features:

• Dimensions - 87.5mm by 44.5mm by 40.5mm
• Dual High-Amp 18650 Batteries - Not Included
• Wattage Output Range: 1-200W
• Voltage Output Range: 6.0-8.4V
• Resistance Range: 0.05-3.0ohm
• Temperature Range: 100° - 300°C / 200° - 600°F
• VW Mode
• TC Mode
• 0.96" OLED Display Screen
• Intuitive Firing Button
• Two Adjustment Buttons
• Integrated 7.0mL Squonk Bottle
• Bottom Filled Squonk Bottle - Hinged Rotating Door
• Hinged Bottom Battery Door
• Top Mounted Squonk Button
• Reverse Protection
• Over-Current Protection
• Over-Heating Protection
• Over-time Protection
• Low Voltage Protection
• Over Charge Protection
• MicroUSB Port
• 510 Connection
• Available in Black, Yellow, Gunmetal, and Gradient Blue

Smoant Battlestar Squonker 24mm RDA Features:

• 24mm Diameter
• Deep Juice Wells
• Brass and Stainless Steel Chassis Construction
• Expansive Dual Post Build Deck - 4 Open Terminals
• Top Secured via Flathead Screws
• Positive Pin PEEK Insulation
• Single or Dual Coil Configuration
• Detachable Structure
• Dual Slotted Angled Side Airflow System
• Vents Directly To Coil Structure
• BF Squonk Pin
• 810 Resin Drip Tip
• Available in Black, Yellow, Gunmetal, and Gradient Blue

Includes:

• 1 Smoant Battlestar Squonker Box Mod
• 1 Smoant Battllestar Squonker RDA
• 1 Spare E-Liquid Bottle
• 1 Solid Pin
• 1 MicroUSB Cable
• 1 Warranty Card
• 1 User Manuals
• 2 Spare Parts Pack

Vape Product Review: Smoant BATTLESTAR SQUONKER 200W Starter Kit from Element Vape on Vimeo.

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.