The Pioneer4You IPV Trantor 200W TC Box Mod utilizes the high-performance YiHi SX500A Chip, introducing a suite of power outputs and customizable modes within a beautifully crafted frame centered around the 1.3" TFT IPS HD screen. The IPV Trantor 200W implements a clean-cut design with futuristic impression with an emphasis on comfortable grip. The large 1.3 Inch TFT IPS full-color display provides fully intuitive arrangements and layouts, working in synergy with the ergonomic adjustment buttons and LED Light-Up strips. The integrated SX500A Chipset presents a tremendous output range of 5 to 200W with comprehensive temperature control support, and efficient processor with four eJuice flavor modes: Soft, Standard, Powerful, Powerful+, and SX-Q-S1 Taste Mode. The adjustment curves technology features an algorithmic calculation that allows users to set, fine tune, and save memory output curves. YiHi's highly regarded temperature control technology has native support for standard TC heating elements, and TCR functionality with Joule and Degree based settings.

Pioneer4You iPV Trantor 200W Box Mod Features:

• Dimensions - 90.2mm by 47.7mm by 31mm
• Dual High-Amp 18650 Battery - Not Included
• Optional Dual High-Amp 18650 Battery
• Advanced YiHi SX500A Processor
• Wattage Output Range: 5-200W
• Joule Output Range: 10-120J
• Voltage Output Range: 1-9.5V
• Temperature Control Range: 212-572F
• Mininum Atomizer Resistance: 0.05ohm 
• Comprehensive Temperature Control Suite
• TCR Adjustments
• SXi-Q Control System
• Power & Joule Memory Modes
• Flavor Mode - Soft, Standard, Powerful, Powerful+, SXi-Q-S1
• Anti-Dry Burning Technology
• High-Quality Zinc Alloy Construction
• Sharp Futuristic Lines
• Centralized Control Face Design
• 1.3" Full-Color TFT IPS HD Display 
• LED Light-Up Functionality Strips
• Magnetized Battery Cover
• Oversized Firing Button
• Three Adjustment Buttons
• Reverse Polarity Protection
• Output Short Protection
• Low Resistance Protection
• Low Battery Voltage Warning
• Overheat Protection
• Firmware Upgradeable
• MicroUSB Port
• Stainless Steel 510 Connection
• Available in Black, Red, Gunmetal, Champagne, Bronze

Includes:

• 1 Trantor 200W Box Mod
• 1 MicroUSB Cable
• 1 Instructional Manual

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

Note: For 18650/20700/21700 battery mods, batteries must be matched and married in terms of brand, model, and battery state at all times. Discharge and recharge batteries within the same grouping of two, three, and etc. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.