The Modefined Draco 200W TC Box Mod is the latest powerhorse vape device in the industry, deploying a refined die-cast Zinc Alloy frame with rugged G10 accent side panels powered by a 200W power chipset. Optimally crafted with a balance between elegance and ergonomics, the Draco 200W implements a large 2.0 Inch Full-Color OLED display with organize interface that presents relevant output parameters. Powered by dual 18650 batteries (sold separately), the Draco feature 200W of maximum power, full temperature control suite with TCR adjustments, and BYPASS Mode.

Modefined Draco 200W TC Box Mod Features:

• Manufactured by Lost Vape
• Dimensions - 92.8mm by 50mm by 29.4mm
• Dual 18650 High-Amp Battery - Not Included
• Wattage Output Range: 5-200W
• Voltage Output Range: 1-8.4V
• Maximum Output: 39A
• Minimum Atomizer Resistance: 0.05ohm
• Temperature Range: 212-600F
• Versatile Temperature Control Module
• Supports Ni200 Nickel, Titanium, and Stainless Steel Heating Elements
• TCR Adjustments
• BYPASS Mode
• Superior Die-Cast Zinc Alloy Construction
• G10 Accent Side Panels
• Anondized Aluminum Control Face
• 2.0" Full-Color OLED Display
• Bottom-Loaded Battery Latch Door 
• Oversized Firing Mechanism
• Three Button Operations 
• MicroUSB Port - Firmware Upgradeable
• Overtime Protection
• Short Circuit Protection
• Low Battery Warning 
• Spring-Loaded Stainless Steel 510 Connection
• Available in Black, Grey, Red, Blue

Includes:

• 1 Modefined Draco 200W Box Mod
• 1 MicroUSB Cable
• 1 Instructional Manual

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

Note: For 18650/20700/21700 battery mods, batteries must be matched and married in terms of brand, model, and battery state at all times. Discharge and recharge batteries within the same grouping of two, three, and etc. Failure to do so may result in injury. Never use damaged or improperly wrapped batteries with this device.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.