The Limitless Mod Co. RDTA Prime is an innovative rebuildable geared towards those that are looking for a tank combined with the ability to build according to their preferences, featuring an expansive build deck, sizeable tank capacity, and a unique top refill system. Constructed of superior stainless steel, the RDTA Prime measures 26mm in diameter and the size certainly shows in the build deck. Going with a minimalistic approach, Limitless implements a dual post layout with 2.5mm by 3mm wide open terminals with one per post, top secured by flathead screws. These open terminals can accept wider or exotic coil configurations for those that love to push the limits of their builds. In addition, along the negative post is an internal top fill system that is stoppered by an Ultem plug and measuring 4mm in diameter, allowing for quick and easy refills of the 5mL eJuice tank below. On the base of the cross-shaped build deck is 4 openings to allow sizeable cotton wicks to dip below into the 5mL juice tank. Furthermore, the airflow system is large and adjustable, utilizing a middle airflow ring measuring 2mm by 13.5mm wide. The widebore 18mm delrin drip tip is proprietary and also integrates the airflow control that can be adjusted to allow the proper amount of airflow past the middle airflow ring. 

Limitless Mod Co. 26mm RDTA Prime Features:

• 26mm Diameter
• 5mL Juice Capacity
• Quartz Glass Reinforcement and Protective Cage
• Superior Stainless Steel Construction
• Dual Post Build Deck - 2.5mm by 3mm Open Terminal Per Post
• Top Secured via Flathead Screws
• Can Accept Big or Exotic Coil Configurations
• Gold Plated Peek Insulated Positive Post
• Single Or Dual Coil Configuration
• Internal 6mm Top-Fill Port - Ultem Plug
• Dual Slotted Airflow Middle Ring - 13.5mm by 2mm Wide Airflows
• Integrated Airflow Control 
• 810 18mm Widebore Delrin Drip Tip
• 510 Connection
• Available in Stainless Steel and Black

Includes:

• 1 LMC 27mm RDTA Prime 
• 1 Replacement Glass
• 1 Screwdriver
• 1 Pack of Spare O-Rings
• 1 Warning Card

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.