Discover the BP Mods x Dovpo Pioneer 22mm MTL RTA, featuring a 3.7mL capacity, conical flavor chamber, and an interchangeable bottom 510 pin airflow system. Constructed from superior stainless steel, the Pioneer RTA can hold up to 3.7mL of eJuice within PCTG or ULTEM glass. Equipped with a single coil build deck, the Dovpo Pioneer RTA vents directly below the coil structure with a threaded 510 pin airflow intake that can be changed without removing any coils, eJuice, or cotton. Covering the dual post build deck is a conical top cap, funneling vapor and flavor directly to the tongue, allowing the Pioneer RTA to extract the best flavor from your favorite eJuice. 

BP Mods x DOVPO PIONEER 22mm RTA Features:
22mm Diameter
3.7mL Refillable Tank Capacity
Pyrex Glass Reinforcement
Stainless Steel Tank Construction
Heat Sink Style Top Cap
Threaded Top Fill System
Conical Flavor Chamber
Dual Post Build Deck - 1 Open Terminal Per Post
Top Secured via Flathead Screws
PEEK Insulator
Single Coil Configuration
Single Deck Vent - Underneath Coil
510 Airflow Pin - 3 MTL / Restricted DL Options
Threaded 510 Connection
Available in Black, Stainless Steel

Includes:
1 Pioneer RTA
3 Airflow 510 Pins
1 510 Drip Tip
1 510 ULTEM Drip Tip
1 ULTEM Replacement Tank
1 PCTG Replacement Tank
1 Spare Parts Bag
1 User Manual

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.