Introducing the authentic Turbo RDA by Tobeco, also designed by Ohm Nation, is an innovative and high performance rebuildable dripping atomizer.

It features the plastic turbine wheel, which is a fan that is inside the RDA, designed to draw out more vapors. Also, the fan allows more air to pulled in so the vapor productions will be thicker and denser clouds. The fan will make a noise when you use this function.

In term of the design, the RDA is made out of 304 stainless steel and consists of 22mm pyrex glass drip tip. Additionally, it comes with the 510 adapter as well so you can use other drip tips. There are two Ohm Nation logos on both sides and considered as airholes, which are adjustable by twisting. To keep it cool, there are heat sink fins at the base as well as top cap.

As for the build deck, it consists of 3-post design. The center post is square to prevent from spinning. The negative post milled to the deck. A deep juice well that measured at 5.5mm.

Authentic Turbo RDA by Ohm Nation Features:

• Plastic Turbine Wheel
• 304 stainless steel construction
• Heat sinks
• Square center post
• Negative posts milled to deck
• Deep juice well (5.5mm)
• Adjustable airflow control

This product is for advanced users only. It consists of risk of damaging your mods, devices, and batteries if it is being used improperly. Please make sure that you have great understanding and have done researches on this product before purchasing.

Note: When it comes to using RDA, RDTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.