Check out the new Augvape INTAKE Dual RTA, an updated dual coil variant of the Augvape Intake RTA, offering a dual coil configuration, convenient quarter turn top refill system, and features a leak-proof dual slotted top adjustable airflow control system that can carefully meter the amount of airflow rushing through the rebuildables build deck. Constructed from superior stainless steel, the Augvape Intake dual RTA measures in at 26mm diameter, presenting a large and workable build deck. Featuring two build deck airflow structures, the INTAKE Dual features four terminals on the build deck base, allowing for a two coil configuration. This doubles the amount of vapor produced when properly built and constructed, which is partially facilitated by a coil lead guide, offering guidance to help cut the ideal coil lead length off when installing coils. Furthermore, the Augvape INTAKE Dual RTA is practically leak-proof, featuring a dual slotted adjustable top airflow control ring situated right below the drip tip.

Augvape INTAKE Dual 26mm RTA Features:

• 26mm Diameter
• 5.8mL Bubble Juice Capacity
• 4.2mL Standard Capacity
• Pyrex Glass Reinforcement
• 304 Superior Stainless Steel Compatibility
• Quarter Turn Top Fill Design - Two Large Fill Ports
• Large Two Post Build Deck - 4 Terminals at Base of Deck
• Side Secured via Hex Screws
• Dual Coil Configuration
• Dual Slotted Adjustable Top Airflow Control Ring
• Airflow Vents to Side and Top of Coil
• PEEK Insulator
• Domed Flavor Chamber
• 810 Low Profile Widebore Drip Tip
• Threaded 510 Connection
• Available in Silver, Gunmetal, Black, Rainbow

Includes:

• 1 Augvape INTAKE Dual 26mm RTA
• 1 Bubble Glass
• 4 Allen Screws
• 1 Allen Key
• 1 Cotton
• 1 Pre-Made Coil
• 1 User Manual
• 1 Warranty Card
• 1 Tool for Cutting Coil

Note: When it comes to using RDA, RTA, and RDTA, we strongly recommended to wash and clean all the atomizers thoroughly and carefully. Likewise, please have a great sense of knowledge when it comes to handling and using these products.

We always strongly recommend testing the coils with ohm-meter before using them with your mods, devices and batteries. Coils with low resistance are not suitable with all mods, devices and batteries. Please make sure that your mods, devices and batteries can handle low resistance before using them.

Note: There is always an inherent risk when using any rechargeable batteries at anytime and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in controlled environment.