Aleader Bhive Squonk BF 100W Starter Kit is optimized for builders looking for a portable squonk system, integrating a 100W maximum chipset powered by a single 18650 battery to pair with the squonk-ready BF Bhive RDA. The body is constructed from a sturdy resin and zinc alloy combination, featuring a resinous panel that is great at dispelling heat. The Bhive Squonk 100W Kit is great for filling on the go as it comes with a squonker pin and 7mL squonk bottle that can be used as a reservoir for extra eJuice. The Bhive Squonk 100W Starter Kit comes with the Aleader Bhive 24mm RDA, featuring a spacious build deck, bottom-fed squonk gold-plated 510 connection, and a simple but effective airflow system. The build deck plays host to two posts with two terminals each - top secured via Allen screws. The coil leads are fastened into them and hang above the airflow outlet which draws airflow from the side airslots measuring in at 9mm by 3mm which produce massive clouds and intense flavor. The 510 connection is squonk ready and gold-plated to ensure the best conductivity.

Aleader Bhive Squonk BF 100W Box Mod Features:

• Dimensions - 83mm by 53mm by 25mm
• Weight - 380g
• 7.0mL Capacity Squonk Bottle 
• Single High-Amp 18650 Battery - Not Included
• Wattage Output Range: 1-100W
• Voltage Output Range: 3.0-4.2V
• Temperature Control Range: 200°-600°F / 100°-315°C
• Resistance Range: 0.05-1.0ohm 
• TCR Mode
• Ni200, Titanium, SS316 Stainless Steel Compatibility
• 0.91" OLED Screen
• Removable Magnetic Panel Design 
• Short Circuit Protection
• Reverse Polarity Protection
• Over Heat Protection
• Low Voltage Protection
• Squonk-Ready Bottom-Feeding Section
• MicroUSB Port - 1A Max Current
• Gold-Plated 510 Connection

Aleader Beehive 24mm RDA Features:

• 24mm Diameter 
• 6mm Deep Juice Well - Squonk Ready
• Superior Stainless Steel Construction
• Spacious Build Deck
• Dual Post - Two Terminals Per Post
• Top Secured via Allen Screws
• Single or Dual Coil Configuration
• Dual Adjustable Airflow - Side to Underneath Coil
• Resin Widebore Drip Tip
• Conical Resin Top Cap 
• Gold-Plated Squonking 510 Connection

Includes:

• 1 Aleader Bhive 100W Box Mod
• 1 Aleader Bhive 24mm RDA 
• 1 USB Charger 
• 1 User Manual 
• 1 Warranty Card 
• 1 Accessories Bag

Please have a great understanding and technical knowledge on how to use this product in order to properly use it.

We highly recommend using an external battery charger for 18650 battery mods, as it helps with balanced charging and prolongs the life of the battery and mod, such as from worn out microUSB port. Never use damaged or improperly wrapped batteries with this device. We recommend all 18650/20700/21700 battery mods to use matching batteries with similar brand, model, and battery state at all times.

In order to use temperature control feature, it requires use of nickel, titanium, or stainless steel coils.

Note: There is always an inherent risk when using any rechargeable batteries at any time and under any circumstances. ElementVape.com and any of ElementVape.com’s parent and subsidiary companies are not held responsible for any damage for any modification of the batteries, chargers, devices and other products that we carry in any form or shape, this is including pack making.

ElementVape.com and any or all of ElementVape.com’s parent and subsidiary companies will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable battery/batteries as well as chargers. Please have a greater understanding of the batteries/chargers you are using and how to care for them properly.

When working with Li-ion (Lithium-ion), LiPo (Lithium-ion Polymer) and any rechargeable cells, please be cautious and carefully use as they are very sensitive to charging characteristics and may explode or burn if mishandled. Please make sure that you have great knowledge on all rechargeable batteries before you use them. Always charge batteries at the clean and fire-proof surface. Never leave charging batteries unattended. If you see that there are visible damages on the batteries, please do not use. Always keep, store and transport the rechargeable cells in a safe, non-conductive container in a controlled environment

Do not use any rechargeable battery as well as any battery charger if any visible damage is present, as well as if the cell or charger has been stressed through mishandling, accidental or otherwise, even if damage may not be visible. Always store and transport rechargeable cells in a safe, non-conductive container in a controlled environment. Please dispose of battery cells, chargers or any other electronic devices in accordance with local laws and mandates.